落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电流量电压小电流量实验设计仪(耐焊弧实验设计仪)-(工业计算机把控好)

High voltage low current tester (arc resistance tester) - (computer control)

货产品命名:耐电弧试验机

Product name: electric arc resistance tester

产品设备参数:NDH-A

Product model: NDH - A

做到准则:GB/T 1411-2002《粉状隔绝建材耐高压得很低的直流电压弧光释放电能的试验检测》(等一起IEC  61621-1997)及ASTM D495等细则的需求设汁制造技术的,并达到IEC 149、UL 746A等耐压步骤

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要符合面积及能力:

本经过多次实验发现机是按选中用电动机、电子元件元件和家廷用电户器元件等企业的水电工用朔料、硅橡胶胶和电接地性漆等电接地性材质的耐脉冲稳定性鉴定,主中用固态垃圾电接地性材质如:朔料、聚酯薄膜、硅橡胶、黑云母、瓷砖、玻璃钢、电接地性油、电接地性漆、纸壳等媒质的耐脉冲稳定性测试图片;

本做实践设计室的时候机由运算机的控制启动,可不可以体现现行实践设计室环境及实践设计室时间段,实践设计室完毕后并手机截图现行实践设计室大数据,并可复印.的标准实验设计情况汇报。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为左右侧二合一格局,顶部为控制平台,顶部为实验室检测箱。

2 本好产品选取*新智能化的控制工艺,依据抉择软件程序(IEC或ASTM)可自然开始检测,并在电子产品上界面显示实验室检测历程和最终结果。

3 **功能顺畅,抗干忧功能强,测试英文定位精度更高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 弧光通断时长误差度:小于等于 ±10ms

2 调压器使用量:2kVA

3 功率试验台电流:12.5kV

4 检验交流电压精密度较:±3%

5 工作电流把控精确:±10%  功率检测要求:1.5%

6 参比电极对试板负荷:(0.5±0.05)N

7 探针的材料:钨棒

8 参比电极范围:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 实用环镜室温:(23±2)℃

10 用到学习环境含水率:(50±5)%

11 电原:220V±5%  50Hz  10A

12 试验装置    步骤:   新国标/美标/10 mA 接连/20 mA 间断/30 mA连续性/40 mA连续性

13 现场实验执行程序如下图所示:

步骤段

电孤工作电流

mA

焊弧通断期限s

各程序流程段持续性时光s

做实验的时候总用时s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间断通

60

240

5

20

间断性通

60

300

6

30

不间断通

60

360

7

40

间隔通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序号顺序

公司名称

使用量

备注名称

01

耐焊弧测试方法仪

一个

 

02

探针系统的

两套

 

03

金属电极橡胶支座

一套套

 

04

供电电力电缆

1套

 

05

接地保护放**

两支

 

06

电压毫安表

一个

 

07

新电脑测控app软件

买套

 

08

坯料架

一只

 

09

参比电极间隔条件块

2块

 

10

斜度规格块

2块

 

11

陶瓷制品片

2片

 

12

喷墨彩印机

1台

知名品牌

13

计算方式机

1台

的品牌

14

适用使用指南怎么写书

1份

 

15

符合标准证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 成品材质:

NDH-A    耐脉冲应力测试仪-微机抑制

NDH-B    耐电弧放电试验装置仪-触感屏设定

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪